Folding table Tully 183x76cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

140 x 76cm

153 x 76cm

The Tully type is a professional lightweight folding table with a light gray polyethylene (HDPE) top cast in one piece. Due to its light weight, the folding table is easily negotiable by one person.

The steel base has a gray hammered epoxy powder coating for a high impact resistance and disappears completely after folding in the blade that is provided with a steel frame for extra strength.

The Tully folding table can be used both indoors and outdoors and is available in various sizes. Transport carts are available for packs of 10 Tully round folding tables.

Ø180cm

The Tully type is a professional lightweight folding table with a light gray polyethylene (HDPE) top cast in one piece. Due to its light weight, the folding table is easily negotiable by one person.

The steel base has a gray hammered epoxy powder coating for a high impact resistance and disappears completely after folding in the blade that is provided with a steel frame for extra strength.

The Tully folding table can be used both indoors and outdoors and is available in various sizes.

For almost all sizes there is a transport cart available. Due to its light weight and the limited height after folding, it is possible to stack up to 30 folding tables on one transport cart.

122x61cm

183x76cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

Ø153cm

Ø165cm

Ø183cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

Ø122cm

Ø165cm

Ø183cm

With its high degree of finishing, the Tampa folding table is the ideal table for the furnishing of a multifunctional space.

The melamine beech finish radiates tranquility and reliability.

The steel u-frame executed in gray hammer-blow epoxy powder coating for high impact resistance can be simply opened and fold and, after collapsing, snaps under the tray so that the frame does not fold out during transport.

The top is available in different sizes and is equipped with 2 steel reinforcement beams on the underside of the top from the 160 cm length.

The leaf supports with non-slip stacking caps ensure that the tables can be stacked easily and without damage in the available transport carts for packs of 15 folding tables.

160 x 80cm

180 x 80cm

With its high degree of finishing, the Tampa folding table is the ideal table for  the furnishing of a multifunctional space.

The melamine beech finish radiates tranquility and reliability.

The steel u-frame executed in gray hammer-blow epoxy powder coating for high impact resistance can be simply opened and fold and, after collapsing, snaps under the tray so that the frame does not fold out during transport.

The top is available in different sizes and is equipped with 2 steel reinforcement beams on the underside of the top from the 160 cm length.

The leaf supports with non-slip stacking caps ensure that the tables can be stacked easily and without damage in the available transport carts for packs of 15 folding tables.

160x80cm

180x80cm

With its high degree of finishing, the Tampa folding table is the ideal table for the furnishing of a multifunctional space.

The melamine beech finish radiates tranquility and reliability.

The steel u-frame executed in gray hammer-blow epoxy powder coating for high impact resistance can be simply opened and fold and, after collapsing, snaps under the tray so that the frame does not fold out during transport.

The top is available in different sizes and is equipped with 2 steel reinforcement beams on the underside of the top from the 160 cm length.

The leaf supports with non-slip stacking caps ensure that the tables can be stacked easily and without damage in the available transport carts for packs of 15 folding tables.

120x80cm

160x80cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

153 x 76cm

236 x 76cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

Ø122cm

Ø153cm

Ø183cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

Ø122cm

Ø153cm

Ø165cm

The Tully type is a professional lightweight folding table with a light gray polyethylene (HDPE) top cast in one piece. Due to its light weight, the folding table is easily negotiable by one person.

The steel base has a gray hammered epoxy powder coating for a high impact resistance and disappears completely after folding in the blade that is provided with a steel frame for extra strength.

The Tully folding table can be used both indoors and outdoors and is available in various sizes. Transport carts are available for packs of 10 Tully round folding tables.

Ø150cm

The Tully type is a professional lightweight folding table with a light gray polyethylene (HDPE) top cast in one piece. Due to its light weight, the folding table is easily negotiable by one person.

The steel base has a gray hammered epoxy powder coating for a high impact resistance and disappears completely after folding in the blade that is provided with a steel frame for extra strength.

The Tully folding table can be used both indoors and outdoors and is available in various sizes.

For almost all sizes there is a transport cart available. Due to its light weight and the limited height after folding, it is possible to stack up to 30 folding tables in one transport cart.

180x76cm

183x76cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

122 x 76cm

153 x 76cm

183 x 76cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

140 x 76cm

236 x 76cm

The Tacoma folding table is simple and practical to use. The table has a 13-layer multiplex top with varnish on both sides and is equipped with two wooden reinforcement slats at the bottom.

The blade has rounded corners and is equipped with a sturdy aluminum edge to prevent damage during transport.

The base in black lacquered steel is fixed through the top with galvanized flat bolts and is provided with wear-resistant inserts.

The Tacoma folding table is available in various leaf shapes and sizes. There is a transport trolley for each shape.

This folding table is often covered. For non-covered folding tables we recommend the Tully or Tampa models.

140 x 140cm